Patch repairs in Glasgow
Plaster patch repairsin Glasgowsmall jobs welcome
The holes, chases and damaged patches other trades would rather not take on, made good and blended back into the surrounding wall.
5-star rated on MyBuilder (124 reviews)Free quotes, usually same day
22 years
On the trowel, time-served
5★ · 124
Verified MyBuilder reviews
£1 million
Public liability cover
1–2 years
Workmanship guarantee
Same day
Free quote turnaround
Service Overview
Small repairs, done properly
Not every plastering job is a whole room. A lot of the work is small and specific: a hole where an old boiler or radiator came off, chases filled after an electrician has been in, a corner knocked off by furniture, a patch of blown plaster behind where a unit used to sit, or a crack that keeps coming back through the paint.
These are the jobs a lot of tradesmen quietly avoid, because they take skill out of proportion to their size. Blending a repair into an existing wall so it disappears under paint is harder than skimming a full wall, since the new work has to meet the old plane exactly and match its texture.
Small patch repair work is a normal part of what RGP does rather than an inconvenience. If it is a genuinely small job, it is priced as a fixed price so you know the number before anything starts.
Work is domestic, carried out personally by Ryan, across Glasgow and the surrounding towns.
Who it is for
- Homeowners with a handful of holes, cracks or damaged patches
- Anyone making good after an electrician, plumber or joiner has been in
- Landlords getting a property tidy between tenancies
- People preparing to sell who want the walls reading clean
When it is needed
- A radiator, boiler, fire or wall unit has been removed
- Cable and pipe chases need filling and finishing
- A corner or arris has been knocked off
- There is a small area of blown or hollow plaster
- Cracks keep reopening through the decoration
The Cost Of Waiting
Why filler is not a repair
Most failed patches were never plastered, they were filled. Filler shrinks as it dries, sits proud or hollow against the surrounding wall, and has a different absorbency to plaster, so it flashes through emulsion no matter how many coats go over it.
The other issue is scope. A repair that stops at the visible damage often stops short of the actual problem. Plaster around a hole is usually loose for some distance past the edge, and if that loose material is left in place the repair lifts with it within a year.
Cracks that keep coming back are almost always being treated as surface damage when they are movement between two materials, at a board joint, at a wall and ceiling junction, or where an old opening was closed up. Filling them repeatedly is money spent annually rather than once.
Common mistakes that make it worse
Filling instead of plastering
Filler shrinks and flashes under paint. A plaster repair, keyed in and troweled flat, disappears.
Not cutting back to sound plaster
A repair is only as good as its edges. Loose material around the damage has to come out before anything goes back in.
Ignoring what caused it
A recurring crack or a damp-stained patch is telling you something. Repairing the surface without dealing with the cause just resets the clock.
Patching without feathering the edges
A repair that stops abruptly leaves a visible line under low light. The new work has to be brought out and blended into the existing plane.
Our Process
Five steps from first callto a guaranteed finish
- 01
Step 1 – Look at it
Ryan checks how far the damage really goes, whether the surrounding plaster is sound, and whether something behind it, movement, an old leak, a failing joint, is going to bring it back.
- 02
Step 2 – Fixed price quote
Small jobs are priced per job, so you know the total before work starts. Free, no obligation and usually turned around the same day.
- 03
Step 3 – Cut back and prepare
Loose and blown material is taken out to a sound edge, the area is cleaned down and bonded or sealed as required, and any beads or scrim needed at the edges are fixed.
- 04
Step 4 – Build up and finish
Deeper repairs are built up in coats and ruled off to the surrounding plane, then finished and troweled flat, with the edges feathered so the repair reads as part of the wall.
- 05
Step 5 – Clean up
Waste is bagged, the area is swept and left clean, and you are told when it will be dry enough to paint. The work carries a 1–2 year workmanship guarantee.
What You Get
The difference it makes,stated plainly
Repairs that disappear
Matched to the surrounding plane and texture, so the wall reads as one surface under paint.
A price before it starts
Small jobs are fixed price, so a two hour repair does not turn into an open-ended bill.
Small jobs actually welcomed
Patch work is a normal part of the diary, not something to be squeezed in reluctantly.
The cause addressed, not hidden
If a crack or damp patch will come back, you are told why rather than sold a repair that fails.
In and out quickly
Most patch repairs are a half day or a day, with minimal disruption to the room.
Covered and guaranteed
£1 million public liability cover and a 1–2 year workmanship guarantee on the repair.
In Detail
How a repair is matched into an existing wall
The first decision is how far to cut back. Plaster around a hole or a blown area is very rarely sound right up to the edge of the damage, so the area is tapped out and the loose material removed until the perimeter rings solid. That usually makes the repair bigger than the damage looked, which is why it lasts.
The build up depends on depth. A shallow scar is filled with bonding and finished; a deep hole where a flue or a boiler bracket came out is built up in layers, allowed to firm between coats and ruled off against the surrounding wall so the plane is continuous rather than dished or proud.
Edges are where repairs are won or lost. The new plaster is feathered out beyond the repair itself and troweled up with the existing surface so there is no ridge to catch the light. On a textured or older surface, the finish is worked to match what is already there rather than left glass-smooth against a wall that is not.
Where the same crack keeps returning, the treatment changes. Junctions that move are raked out and reinforced with scrim or filled with a flexible material rather than rigid plaster, and if the movement is structural you will be told that plainly, because no plaster repair will hold across it.
Materials used
Bonding coat
Used to build out deeper repairs in layers before the finish coat goes on.
Multi-finish plaster
The finish coat, troweled flat and feathered into the surrounding surface.
Scrim tape and beads
Used at joints, junctions and rebuilt corners to stop the repair cracking at its edges.
PVA and bonding agents
Applied to control suction on old, dusty or dense backgrounds so the repair bonds properly.
Variations of the work
Hole repairs
Made good where boilers, fires, radiators, vents or old fittings have been taken out.
Chase filling
Cable and pipe chases filled, finished and blended after first fix work.
Corner and arris repairs
Knocked corners rebuilt with beading and finished straight and sharp.
Crack repair
Recurring cracks raked out, reinforced and finished, with an honest opinion on what is causing them.
Where this work typically applies
- Old back boilers and gas fires removed from chimney breasts
- Rewires leaving chases through several rooms
- Kitchen units taken off and the wall behind left damaged
- Removals damage before a property is handed over
- Small blown patches found after wallpaper comes off
Domestic work is the priority: single rooms through to full house and flat refurbishments. Larger commercial contracts are not the focus, so your job is not queued behind a site.
Questions, Answered Straight
Patch Repairs in Glasgow- the things people ask
Is a small repair worth calling a plasterer for?
Yes. Patch work is a normal part of the diary, and a proper plaster repair costs less than filling it repeatedly and repainting the wall each time.
Will the repair be invisible once painted?
That is the aim, and it is why the repair is cut back to sound plaster and feathered into the surrounding surface. On very old or textured walls the finish is worked to match rather than left smooth against a wall that is not.
How much does a patch repair cost?
Small jobs are priced per job as a fixed price, so you know the number before anything starts. There are no 'from' prices on this site because every repair is a different size and situation.
Can you do several small repairs in one visit?
Yes, and it is usually the most economical way to do it. List everything when you call and it can be priced and done together.
My crack keeps coming back. Can you fix it?
Often, yes, once it is treated as a moving junction rather than surface damage. Where the movement is structural you will be told plainly, because no plaster repair will hold across it.
How soon can it be painted?
Small repairs dry faster than a full room but still need time. Use a thinned mist coat first, then topcoats, and you will get guidance on timing for your specific repair.
Is the repair guaranteed?
Yes, the workmanship carries a 1–2 year guarantee covering adhesion, blistering and debonding. Structural movement and settlement cracking sit outside that, as set out in the guarantee.
Which areas do you cover?
Glasgow and the surrounding towns including Paisley, Rutherglen, Bearsden, Clydebank, Bishopbriggs, Cambuslang, Renfrew and Newton Mearns.
Related Work
Often done at the same time
Plastering
Rooms handed back straight, smooth and ready for paint, without weeks of disruption, without dust through the whole house, and without chasing a tradesman who stopped answering.
See this service →
Skimming & Re-Skimming
A thin coat of finish plaster over what you already have: the fastest, least disruptive way to turn a patched, rippled or artexed surface into a wall that looks like it was built yesterday.
See this service →
Ceiling Repairs
A ceiling that is coming away is not a decorating job. It gets stabilised, repaired and skimmed back to a single seamless surface, so you stop watching it and start forgetting about it.
See this service →
Patch Repairs across the west of Scotland
Covering Glasgow, Paisley, Rutherglen, Bearsden, Clydebank, Bishopbriggs, Cambuslang, Renfrew, Newton Mearns and the surrounding towns. You can also see recent work, read the customer reviews, find out more about Ryan or head back to the homepage.
The Guarantee
What the 1–2 year workmanship guarantee actually covers
Every job carries £1 million public liability cover and a written 1–2 year workmanship guarantee. The terms are set out plainly below, so you know exactly where you stand before any work starts.
Covered
- Adhesion issues, where the plaster fails to bond as it should
- Blistering in the finished surface
- Debonding, commonly called blown plaster
- Plaster coming away from the wall
Not covered
- Structural movement in the building
- Cosmetic settlement cracking
- Shrinkage
- Damp or moisture caused by occupancy, such as a lack of ventilation or drying washing indoors
- Overboarding onto an existing unstable ceiling, which cannot be guaranteed because of the risk of movement behind the new boards
Next Step
Small job?Still worth doing properly
Free quote, usually the same day, with a fixed price on smaller repairs so you know the number before anything starts. £1 million public liability cover and a 1–2 year workmanship guarantee.
- 22 years on the trowel, 10 self-employed
- 5-star rated on MyBuilder across 124 reviews
- £1 million public liability cover
- 1–2 year workmanship guarantee on workmanship
Request Your Free Quote
Free, no-obligation quotes, usually turned around the same day.
No obligation. No pressure. Straight answer on price and timings.